Light drainage pump type ABS Coronada
Light drainage pump type ABS Coronada
Light-weight pumps for drainage
The Coronada is a plug-in, stainless steel submersible pump designed to remove wastewater containing solids up to 10 mm. This fully flood-proof, pressure-tight encapsulated unit runs continously until all water is gone.
- Easy installation with Schuko plug and 10 m cable
- Automatic operation with built-in float switch for reliable operation
- Backflow prevented with built-in check valve
- Protected against overheating by thermal sensors in motor
- Suitable for fixed or transportable installations in internal and external applications
- Aggressive media resistant SX version available, with a high-grade stainless steel shaft, Viton seals, and PVC cable
- Domestic and commercial wastewater without toilet waste
- Drainage of pits, swimming pools, and flooded cellars
- Removal of nuisance water from gullies or pedestrian underpasses
- Coronada SX for aggressive wastewater
- Thermal sensors
- Mechanical seal on medium side; oil-lubricated lip seal on motor side
- Protection type IP 68
- Stainless steel rotor shaft supported in lubricated-for-life ball bearings
| Capacity |
9 m3/h / 39 US gpm |
| Head |
7.5 m / 24.6 ft |
| Temperatures |
40° C / maximum 60° C for five minutes |
| Discharge sizes |
G 1¼” |
| Maximum speed of rotation |
2,900 min-1 |
Data sheets
Installation manuals
Dimension drawings
Project design files BIM
Commercial wastewater without toilet waste includes drainage and grey wastewater.
Domestic wastewater without toilet waste includes drainage and gray wastewater.
